17 March 2018

Build the Back to the Future DeLorean - Issues 028-031

Issues 028-031
Issue 020 is still on back order, but some are reporting shipments of 020 and other back order issues.  Hopefully, I will get 020 in my next shipment.  Meanwhile, the new parts allow us to continue...for the most part...without the missing issue.

Issue 028 - Radiator

Issue 028 contents
You will need the Radiator fans from the previous issue (027).  This is another simple build with only three parts.  All plastic parts in this bag.  The best part is, you get to mount the radiator assembly on to the frame when done.  These four issues all mount onto the frame.

Issue 029 - Chassis Plate

Issue 029 contents
The Chassis Plate, as they call, is one large hunk of die-cast.  Obviously, in a real car, this is part of the fiberglass tube, not a metal floor as in most cars. No big deal, it adds weight and value to the model kit.

There is also a center plate that comes with this.  Only two screws on the back end holds this plate down for now.  No worries, the other two screws will be part of the fuel tank cover plate.

Bottom of the chassis
On the bottom of the chassis in marked with 1/8 1982 Delorean DMC-12 

There are two mistakes with this mark.  First, the year should be 1981.  Second, and many people make this mistake, DeLorean is written with an upper case "L".  Check the old DMC documents, see how John DeLorean wrote and signed his name.  Every time you write it with a lower case "l",  you die a little inside...much like smoking a cigarette.  I guess that is your pro tip of the day.

Issue 030 - Water Pipes

Issue 030 contents
These parts are a little tricky.  Pay attention to the orientation of the pipes and were the screws holes line up with the chassis.

There are two black hoses that need to be mounted on the finished engine. If you are missing parts of the engine, hold on to these two hoses for later.

Issue 031 - Air Deflector Plates

Issue 031 contents
These are plastic parts.  In a DeLorean, the Air Deflector Plates are metal (I think aluminum).  The idea is, as air is rushing along the bottom of the chassis, these 'deflect' air into the rear brakes.  Most DeLorean owners have removed these from their car.  Mine were removed, I have yet to reinstall them.

For such a small and 'unimportant' piece, there sure are a lot of screws used to attach these.  Seven on each side for the model kit.  Air Deflectors on a full size car only use three nuts to secure the plates.

At the end of Issue 031, your car should look like this, but hopefully with an engine in place.

Assembled car sans engine

Now the best part, the screw count, omitting 020, 022, 024, 025, and 026.

26-AP, 7-BP, 2-CP, 9-AM, 9-BM, 4-EM, 4-CM, 10-DM, 2-DP, 1-FM, 3-GM, 3-HM, 2-IM, 1-EP, 4-FP, 2-JM, 1-HP, 1-GP, 1-NM

to be continued...

1 comment:

  1. Hello,

    please note that the basic frame of a DeLorean is not black. It has the colour Light Grey (semi gloss / RAL 7035). Look here: http://2.bp.blogspot.com/-EhPGSdjNYmo/Ulx-zpS_VVI/AAAAAAAAATs/HRwlKdsUl34/s1600/1_full_body_before.JPG I hope it was helpful.

    ReplyDelete